Validating a dance specific screening test for balance dating middle ages web series
The safety factor applied should depend on the risk.
It should be higher for more critical applications and unstable environments.
In this lower range, the repeatability is the dominant source of error and is virtually independent of the test weight.
With higher weights (i.e., above 5%), the repeatability is a weak function of the test weight and so the repeatability will increase, leading to higher minimum weight values.
Crucially, weighing net samples sufficiently above the minimum weight is recommended to take balance performance fluctuations into account.
The implication is that a safety factor should be used when weighing, as shown in Figure 3.
Performing the right tests at the right intervals will ensure quality results.
The chapters attempt to simplify previous descriptions and reflect current state-of-the-art weighing practices.The more critical the impact of an incorrect result, the more testing should be carried out, to reduce the risk of OOS or OOT results.In any case, it should contain at least a regular calibration with determination of measurement uncertainty and periodic sensitivity and repeatability testing.provides additional clarification and extends the scope to any balance used for an analytical procedure.These major revisions focus on balance qualification and operation.
This applies for balances used to weigh analytes for quantitative measures.